background image

GENERAL INFORMATION

5

EMPTYING IN 10’

IDRA MS

150

Quantity of domestic water obtained in 10’ with boiler pre-heated to 60°C (coil probe point reference) and pri-

mary exchanger at the indicated delivery temperature, considering an increase of the domestic water tempera-

ture of 30°C between inlet and outlet (according to EN 12897).

Coil delivery temperature

80°C

272

l

70°C

250

l

Quantity of domestic water obtained in 10’ with boiler pre-heated to 55°C (coil probe point reference) and pri-

mary exchanger at the indicated delivery temperature, considering an increase of the domestic water tempera-

ture of 30°C between inlet and outlet (according to EN 12897).

Coil delivery temperature

60°C

223

l

Quantity of domestic water obtained in 10’ with boiler pre-heated to 45°C (coil probe point reference) and pri-

mary exchanger at the indicated delivery temperature, considering an increase of the domestic water tempera-

ture of 30°C between inlet and outlet (according to EN 12897).

Coil delivery temperature

50°C

170

l

Pressure drops

COIL

PRESSURE DROP (mbar)

800

600

400

1000

200

0

0

1000

2000

3000

4000

FLOW RATE (l/h)

Содержание IDRA MS 150









Отзывы: