Beretta EXCLUSIVE GREEN 16 RSI, Инструкция по установке и эксплуатации

Страница: 20 / 100

20
The values shown on the display range between
- 40 °C and 40 °C.
Beyond these values the display shows “ - -”
Info 2 shows circuit pressure (fig. 33)
Info 3 shows the set heating temperature (fig. 34)
Info 4 Info 4 Info 4 Info 4 Info 4 fffffor GREEN C or GREEN C or GREEN C or GREEN C or GREEN C.S .S .S .S .S.I .I .I .I .I.: .: .: .: .: shows the set domestic hot
water temperature (fig. 35)
fffffor GREEN R.S or GREEN R.S or GREEN R.S or GREEN R.S or GREEN R.S.I .I .I .I .I.: .: .: .: .: shows the setted temperatu-
re (only water tank with sensor, fig. 35)
Info 5 Info 5
Info 5 Info 5
Info 5 displays the set heating temperature, in reference
to the second circuit, only if it is connected.
S.A.R.A. function
If the “autumn” mode is selected, the S.A.R.A.
(Automatic Ambient Adjustment System) function can
be activated.
Turn the heating water temperature selector to a tempe-
rature ranging between 55 and 65 °C.
The S.A.R.A. self-adjustment system activates: depending
on the temperature set on the ambient thermostat and the
time taken to reach it, the boiler automatically adjusts the
heating water temperature to reduce operating times,
thereby increasing operating comfort and energy saving.
Fig. 33
Fig. 35
Fig. 34
It is possible to display information, which may be useful
for the Technical Assistance Centre, by pressing the
button for 10 seconds: the code “INF2” appears on the
display.
INF2
Step Description Display Display
2 digits 4 digits
1 Input probe temperature xx 01 ° C
2 Return probe temperature xx 02 ° C
3 GREEN C.S.I.: first sanitary probe temperature (*) xx 03 ° C
GREEN R.S.I.: sanitary probe temperature:
water tank with thermostat (A and B cases) - - 03 ° C
water tank with probe (C case) xx 03 ° C
4 Not used in this model xx Cond ° C
5 Not used in this model xx 05
6 Second heating system probe temperature xx 06 ° C
7 Not used in this model xx 07
8 Ventilator speed /100 xx FAN
9 Not used in this model xx 09
10 Not used in this model xx 10
INF2 list
Note (*): if the SAN probe is faulty or disconnected, in the place of the value “- -” is displayed.