Beretta 20072002, Руководство по установке

Страница: 14 / 24

14
2 INSTALLATION
2 1 Unpacking the product
The
Power Plus Box SE
condensing system is supplied on
a pallet, strapped and protected by cardboard packaging.
Its condition and compliance with what was ordered must
be checked immediately. The specific characteristics of
the product are indicated on the outside: model, power,
product code and serial number. If there is a discrepancy
between what was ordered and what was received, imme-
diately contact the local agent, warehouse or sales service.
2 2 Opening
Remove the straps (1) and the cardboard packaging (2).
1 Strap
2 Cardboard packaging
3 Pallet
4 Modular condensing system
5 Document envelope containing:
- Instruction manual
- Hydraulic test and warranty certificate
- Barcode labels
6 Accessory envelope containing:
- Natural gas to LPG transformation kit (valid for Eu-
rope)
- Door key
The following is also supplied:
positioned on the base inside the modular system:
- 2 - 5” DN 125 - PN 6 flanges complete with gaskets
- 1 - 3” DN 80 - PN 6 flange complete with gaskets
- polypropylene coupling pipes for the flue gas mani-
fold and condensate outlet
positioned inside the control panel:
- low temperature boiler/delivery sensor
- outdoor sensor.
b
The document envelope (5) must be kept in a safe
place. Any copies must be requested from
B
,
who will send the new documentation within 45 days
and who reserves the right to charge for the copies.
a
Do not dispose of packaging material into the envi-
ronment, or leave it within the reach of children, since
it can become a potential hazard. Dispose of packag-
ing material in compliance with applicable legislation.
4
6
3
5
2
1