Bercomac BERCO PIONEER 700455, Руководство пользователя

Страница: 12 / 34

10
ASSEMBLY
Install the belts on the snowblower pulleys as shown.
IMPORTANT:
Make sure that each strand of the belts are inside the
pins that are used as belt guides (item 4).
NOTE : The adjustment with the tension on the belts
will be done in Step 6.
Install the belts
Install the brackets or the straps
STEP 3
VEHICLE PREPARATION:
NOTE: A 1 7/8” tow hitch ball is required.
Remove the nut from the suspension arm (item 1)
on the vehicle and install the bracket (item 2).
Secure loosely with the original nut. Do the same for
the other side.
If you can not install the brackets on your vehicle,
install the lift strap (item 3) by looping it around the
suspension arm (as shown ) on the vehicle.
Tighten the loop firmly.
Do the same for the other side.