Bercomac BERCO PIONEER 700455, Руководство пользователя

Страница: 13 / 34

11
ASSEMBLY
STEP 4
SUBFRAME PREPARATION:
Determine according to the height of the vehicle
which set of holes to use to assemble the wheel
support (item 1) to the subframe (item 2).
The subframe must be parallel with the ground when
the subframe is installed under the vehicle.
Install the wheel support (item 1) to the subframe
(item2) by using four 3/8" x 1" hex. bolts (item 3), four
lock washers (item 4) and four hex nuts (item 5)
Tighten the bolts firmly.
Install the wheel support to the subframe
Install the assembled turnbuckles
Install the snowblower hitch (item 1) to the wheel
support (item 2) with the pin (item 3). Make sure the
pin is in the locked position.
Secure with the 4mm hair pin (item 4).
Tighten firmly.
Install the assembled turnbuckles (item 1) on the
subframe (item 2). Secure with two 5/16" x 1" hex
bolts (item 3), two 3/8" flat washers (item 4) and two
nylon insert lock nuts (item 5).
Tighten loosely enough to allow the parts to move
freely.
Install snowblower hitch