Bercomac BERCO PIONEER 700455, Руководство пользователя

Страница: 14 / 34

12
ASSEMBLY
Adjust the length of the subframe
You have nine different positions on the subframe
extension (item 1) (the extension can be inverted) to
adjust the length of the subframe.
To choose the right adjustment, insert the subframe
extension (item 1) into the subframe (item 2) and
insert the hitch support (item 3) on the subframe
extension.
Do not secure.
Turn the hitch support to the side to facilitate
installation.
Drive the vehicle over the subframe, make sure the
caster wheels do not touch the front wheels on the
vehicle.
Identify the right length and secure in place with a pin
(item 4) and 3mm hair pin (item 5).
Choose between the three positions (see figure), the
height of the hitch support.
There must be a maximum of ground clearance
according to your vehicle.
Assemble the hitch support (items 1 & 2) with four
3/8" x 3/4" hex. bolts (item 3) and flange nuts (two on
each side) if applicable (Figure A does not have the
hitch supports (item 1)).
Install the hitch (item 4) with a 3/8" x 3" hex bolt (item
5) and nylon insert lock nut.
Assemble the hitch support
Secure the hitch support on the tow hitch ball
Insert the assembled hitch support (item 1) onto
the subframe extension (item 2). Secure in place
with the pin (item 3) and the 3mm hair pin (item 4).
NOTE: The hitch support has three sets of holes
to increase the length of the subframe if
necessary.
Attach the hitch assembly on the tow hitch ball of
the vehicle.
Insert the pin (item 5) and secure with a 3 mm hair
pin (item 6). Make sure the subframe does not
come into contact with vehicle at any time.
NOTE: You can turn the hitch assembly (item1) to
facilitate displacing the vehicle over the subframe
by removing the pin (item 3).