Assembly & initial set-up
7
Connect the wires on the battery
CAUTION
FOR YOUR SAFETY:
Read and follow the safety precautions for the battery in
the vehicle’s owner’s manual.
Connect the relay wires(item A)
and the vehicle’s wires
on the vehicle's battery.
•
The red wires (+) on the positive post (item 1).
•
The black wires (-) on the negative post (item 2).
Make sure to retighten the nuts on the terminals.
Secure the relay (item B) in an appropriate place using a
nylon tie wrap.
STEP 2 - Connection and disposition of
wires and control box
Connect the connector (A1) of the relay wire assembly
(item 1) to the connector (A2) of the control box. Connect
the connector (B1) of the extension (item 2) to the
connector (B2) of the control box wire (item 3). Connect
the connector (C1) of the extension to the connector (C2)
of the control box.
NOTE
: Before choosing the ideal place to install the
control support (item 1) and control box, connect the
control box wires to the motors and to the battery (see
instructions on next page).
Use the joystick to determine which direction activates
which motor. We suggest putting the control box on the
right fender of the tractor close to the driver’s seat or
close to the steering wheel according to your preference.
Secure the control support wi
th two 1/4” n.c. x 3/4" bolts
and flange nuts. Install the control box on the support.
Route the wires on the frame to the front of tractor
IMPORTANT :
Make sure wires do not come in contact
with any moving parts, sharp edges, moving parts,.. or
any other component who can damage the wire.
Содержание BERCO 701036
Страница 13: ...Parts breakdown 11 Part list and parts breakdown...
Страница 14: ...Parts breakdown 12...