Assembly & initial set-up
8
NOTE:
It is recommended to place the wire connectors as
close as possible to the subframe. Secure the wires in an
adequate place in order to separate the accessory from
the vehicle when storing.
Connect the wires to the electric motors. The longest
wires are connected to the deflector motor.
Turn the chute to its maximum towards the right. Secure
the wire for the deflector motor (item 1) with a tie wrap
around the motor.
Tie the wire for the deflector with another tie wrap in the
hole (item 3) at the base of the deflector as shown.
Secure the wires for the rotation motor (item 2) with a tie
wrap.
Be sure to leave enough wire length to be able to turn the
chute.
Содержание BERCO 701036
Страница 13: ...Parts breakdown 11 Part list and parts breakdown...
Страница 14: ...Parts breakdown 12...