Bercomac 700580-4, Руководство пользователя

Страница: 17 / 100

14
ASSEMBLY
INSTALLING THE ELECTRICAL SUPPLY
Connect wire assembly (104017) to the positive
post on the vehicle’s battery. Connect the black
wire on the vehicle’s frame.
Connect the electrical supply on the vehicle’s battery
PREPARING THE SUBFRAME
1. Assemble the wheel support (item 1) on the
subframe (item 2) with four hex bolts 3/8" x
1" (item 3) four flange nuts 3/8" (item 4).
Installing the wheel support
2. Install the assembled turnbuckles (item 1)
(assemble the chain ( item 1A ), the shackle ( item
1B ) and the turnbuckle ( item 1C ) together) on the
subframe (item 2) with two hex bolts 5/16" x 1"
(item 3) , two flat washers 3/8" (item 4) and two
nylon insert lock nuts 5/16" (item 5) . Slightly tighten
the nuts .
Installing the turnbuckles
NOTE: The set of holes used to assemble the wheel
support to the subframe depends on the height of the
vehicle. Once installed the subframe must be parallel
with the ground.
5
3
2
1
4
Control box
Item 1 : The 4 positions switch that controls the chute
defelector and rotation.
Item 2 : P.T.O. switch
Item 3 : Light indicator for P.T.O.
Item 4 : Kill switch
Item 5 : Light switch (if installed)
3
2
1
5
4
1A
1B
1C