Bercomac 700580-4, Руководство пользователя

Страница: 16 / 100

13
ASSEMBLY
VEHICLE PREPARATION
Fastening the subframe
Choose one of the three following options as a
means of fastening the subframe.
Option A:
Install the lift strap (item 1) by making a loop around
the front suspension arm of the vehicle.
IMPORTANT: Don’t install the strap on a cutting
edge. Tighten the loop firmly.
Option B:
Remove the nut and bolt from the vehicle’s front
suspension arm. Secure the bracket (item 3) with a
bolt, flat washer and nut (item 2) .
Do not tighten the nut too firmly.
Option C:
Remove the nut and bolt from the vehicle’s front
suspension arm. Secure the bracket (item 4) with a
bolt, flat washer and nut (item 2) .
Do not tighten the nut too firmly.
NOTE:
Repeat the operation on the other side of
vehicle.
Vehicle preparation
CONTROL BOX INSTALLATION.
1. Choose between the two different ways of
securing the control box support (item 1).
Option A
Use two hex bolts 1/4" x 1 1/2" (item 2) , two spacers
(item 3) and two flange nuts 1/4" (item 4) in order to
secure the control box support to the support
brackets. (item 5).
NOTE: Choose the right combination of holes on the
control box support so that the front of the control box
is facing the front of the vehicle.
Option B
Use the support as a template and drill two holes in
an appropriate place on the vehicle.
Secure the control box support with two bolts 1/4" x
1/2" (item 6) and two flange nuts 1/4".
2. Insert the control box (item 7) in the control box
support.
NOTE: In order to avoid damages due to water
accumulation, make sure the control box is installed
horizontally.
Installing the control box
Suspension arm
Nut
Bolt
Pin
Nut