background image

19

Maintenance

6005437_a – 30.05.2022

EN

6. 

Maintenance

6.1 

Safety instructions for maintenance

 

D

WARNING!

Hazard through a disregard of the maintenance 

instructions!

This chapter contains important information for the safe 
maintenance of the device.

 

Read through this chapter carefully before carrying out 
maintenance work on the device. 

 

Follow the safety instructions.

 

Carry out the maintenance work as described.

 

y

Repairs only by qualified specialist personnel.

 

D

“1.2 Authorised target groups” (page 4).

 

y

Electrical work only to be undertaken by qualified 
electricians.

 

D

“1.2 Authorised target groups” (page 4).

 

y

Maintenance only by authorised users.

 

D

“1.2 Authorised target groups” (page 4).

 

y

No maintenance work permitted by children under 
8 years old and persons who would not be able to 
properly assess the hazards associated with handling the 
device.

 

y

When working at heights, ensure good stable footing 
(e.g. stable stepladder).

 

y

The hob and other parts that can be touched must be 
cooled down.

 

y

Never open the fan housing.

6.2 

Maintenance

6.2.1 

Changing the lamps

The device is fitted with maintenance-free LED lighting. 
In the event of a fault:

 

Please consult your dealer or customer services.

6.2.2 

Replacing filter filling

Odours are trapped in the filter filling in the recirculated air 
filter. The odour-free, cleaned room air is fed back into the 
room.

Recirculated air filters are maintenance-free for up to two 
years. Then filter filling must be replaced at regular intervals.

Maintenance intervals

 

y

When the control indicator blinks - every 1000 operating 
hours.

 

Observe the instruction manual for the remote control.

 

y

With odours in the exhaust air.

 

y

With daily use, after 24 months at the latest.

 

y

With occasional use, after 36 months at the latest.

 

D

ATTENTION!

Danger of property damage through falling parts!

When working on the device, parts of the device or tools 
could fall and damage the kitchen equipment.

 

Protect the cooled hob and other surfaces in the cooking 
area (e.g. with thick cardboard).

The device must be in the lower end position.
The front side of the device can be identified by the company 
logo.

 

Position yourself in front of the device.

 

Remove the cover upwards. Pay attention to the support 
cable and the mains cable.

Содержание Skyline Round BIH 60 SKR





























Отзывы: