Berbel Skyline Frame BIH 100 SKF Скачать руководство пользователя

Страница: 10 / 28

Installation

6006244_0 – 30.05.2022

3.4

Installation procedure

Short overview:
1.  Preparation for installation
2.  Unpack the device
3.  Install the ceiling mounting plate
4.  Hang the device in place
5.  Set the end positions
6.  Assemble shelves
7.  Set colour temperature
8.  Check and carry out commissioning

3.4.1

Preparation for installation

☞

Familiarise yourself with the installation situation and the
associated documents:

Device and instructions

Accessories

Installation location

☞

Assemble the tools and materials required:

Stable stepladder

Folding rule or measuring tape

Pencil

Spirit level

Slotted screwdriver SL 2.5 x 0.4

Phillips screwdriver PH1, PH2

13 mm spanner

Allen key SW 2.5 mm

Hammer

ø 8 mm masonry bit

Hammer drill

Protective material (e.g. thick cardboard) for the hob
and the worktops

☞

Keep the installation area free of objects that could be in
the way or that could be damaged.

☞

Make sure that the hob and other parts that could be
touched have cooled down.

☞

Protect the hob and other surfaces in the installation area
(e.g. with thick cardboard).

☞

Ensure that the power supply is switched off and remains
so. Connect the power supply only when instructed to do
so in the installation instructions.

3.4.2

Unpack the device

ATTENTION!

Hazard of glass breaking or other damage due to

incorrect handling!

The device and its surfaces can be damaged when being
unpacked or transported.

☞

Do not cut into the protective cardboard packaging.

☞

Keep objects that could scratch the device far away from
it (e.g. tools, belt buckles).

☞

Unpack the device and all accompanying parts carefully.

☞

Set the device down on a firm, clean and protective
surface (e.g. thick cardboard).

☞

Check the device and its constituent parts for damage.

☞

Check the delivery is complete.

“2.5 Scope of delivery” (page 7).

If parts are missing or damaged:

☞

Please consult your dealer or customer services.

☞

Remove the packaging material and the protective film.

“8.1 Dispose of packaging” (page 25).

Содержание Skyline Frame BIH 100 SKF





























Результаты поиска

Содержание Skyline Frame BIH 100 SKF

Отзывы:

Похожие инструкции для Skyline Frame BIH 100 SKF

Бренды по названию

Популярные бренды

Berbel Skyline Frame BIH 100 SKF, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание Skyline Frame BIH 100 SKF

Отзывы:

Похожие инструкции для Skyline Frame BIH 100 SKF

Бренды по названию

Популярные бренды