Berbel Skyline Frame BIH 100 SKF, Инструкции по эксплуатации и монтажу

Страница: 16 / 28

16
Installation
6006244_0 – 30.05.2022
3.4.5 Set the end positions
The remote control is used to set the end positions.
Observe the instruction manual for the remote control.
D ATTENTION!
Danger of damage due to falling parts!
The cover can fall down when it is being removed and
damage the hob, the kitchen furnishings or other objects.
☞
When removing the cover, hold it tightly in both hands.
☞
Protect the area below the device (e.g. using thick
cardboard).
☞
Fold the faceplate down.
☞
Remove the cover over the teach button.
D ATTENTION!
Danger of irreparable property damage through
improper operation!
If the device drives against an obstacle, the support cables
may be pushed from the rollers.
☞
Make sure that the route of travel is clear.
The device and the BFB 6bT remote control must be
connected once.
D
“4.2 Operating the device” (page 18).
☞
Use the remote control to move the device upwards.
☞
Press and hold down the teach button to slow down the
movement.
☞
Release the teach button when the desired top end
position is reached.
☞
Use the remote control to move the device downwards.
☞
Press and hold down the teach button to slow down the
movement.
☞
Release the teach button when the desired bottom end
position is reached.
In order to correct the end positions:
☞
Repeat the setting.