23
Maintenance
6006244_0 – 30.05.2022
EN
Moisture in the device.
y
Dripping or splashing water has penetrated the device.
y
Liquid (e.g. from vases, bottles on the device) has
penetrated the device.
☞
Immediately shut off the power supply, by removing
the fuse.
☞
Make sure that the power supply cannot be
unintentionally reconnected. For example by tasking
a person with ensuring that the fuse/breaker is not
restored/switched on.
☞
Ensure that no more liquid can penetrate the device.
☞
Allow the device to dry.
☞
Have the device checked and repaired by qualified,
specialist personnel prior to using the device again.
After a power interruption, the “Raise” button flashes on the
remote control.
y
The power supply dropped out whilst the drive motor
was in operation. The device is in calibration mode and
requires a reference run.
☞
Press the “Raise” button on the remote control.
The device moves fully upwards once again and then into
the set top end position.
The “Raise” and “Lower” buttons on the remote control flash but
the device does not move.
y
The safety switch-off took place because a problem was
detected (e.g. faulty winding or tearing of a suspension
rope).
☞
Please consult your dealer or customer services.
The device does not react to inputs on the remote control.
Observe the instruction manual for the remote control.
If a fault persists:
☞
Please consult your dealer or customer services.
Содержание Skyline Frame BIH 100 SKF
Страница 28: ...6006244_0 30 05 2022 ...