14
Installation
6006244_0 – 30.05.2022
D
WARNING!
Risk of injury due to the device falling down!
Loosen the mounting sleeves to align the device. If the
fastening sleeves are loosened too far, the support cable
can be torn out of the screwed end and the device may fall
down. The device’s size and weight can cause severe injuries.
☞
Never unscrew the fastening sleeves completely.
☞
Ensure that there is no more than 10 mm of thread on the
screwed end visible.
☞
Align the hood body horizontally by adjusting the
fastening sleeves.
☞
Tighten all fastening sleeves using the lock nuts (counter
nuts) on the ceiling mounting plate.
☞
Ensure that all fastening sleeves are fully tightened on the
ceiling mounting plate.
The hood body is aligned and secured.
☞
Plug the Wieland plug into the Wieland socket.
☞
Place the cable anchor into the bracket on the ceiling
mounting plate.
☞
Feed the mains cable with the Wieland plug tightly from
the device to the ceiling mounting plate.
☞
Feed the mains cable with the Wieland plug through the
cable anchor.
☞
Tighten the screws on the cable anchor.
Содержание Skyline Frame BIH 100 SKF
Страница 28: ...6006244_0 30 05 2022 ...