Berbel Moveline BTH 100 ML, Инструкции по эксплуатации и монтажу

Страница: 15 / 36

15
Installation
6004067_a – 01.08.2018
EN
3.5.5 Install filter (with recirculating or hybrid
operation)
The recirculating or hybrid filter can be installed in various
positions on the device, depending on the structural
situation. In these instructions for example, the position to
the side of the fan box is described.
Observe the order documents.
There is a pipe connection (Ø 150 mm) on the fan housing as
an installation aid for the installation of the filter.
The position of the filter is secured with a retainer clip.
The filter must be attached to the device before installation,
because the lower retainer clip is then easy to fasten.
Recirculated air mode
☞
Fasten the lower holding clamps to the fan housing.
☞
Place the recirculated air filter onto the guide on the fan
housing.
☞
Slide the retainer clips over the nuts on the recirculated
air filter. The nuts must latch into the recesses.
☞
Ensure that the recirculated air filter is correctly installed.
Hybrid mode
☞
Fasten the lower holding clamps to the fan housing.
☞
Place the hybrid filter onto the guide on the fan housing.
☞
Slide the retainer clips over the nuts on the hybrid filter.
The nuts must latch into the recesses.
☞
Ensure that the hybrid filter is correctly installed.