Berbel Moveline BTH 100 ML, Инструкции по эксплуатации и монтажу

Страница: 16 / 36

16
Installation
6004067_a – 01.08.2018
3.5.6 Install the device
D WARNING!
Danger of injuries through improper handling!
Installation of the device requires a great deal of physical
exertion due to its size and weight. If the device falls down,
serious injuries are possible.
☞
Install the device with two persons.
☞
Ensure stable footing during installation.
☞
Ensure that no other people are in the working area.
D ATTENTION!
Danger of property damage through improper handling!
Installation of the device requires a great deal of physical
exertion due to its size and weight. If the device falls, the
device, kitchen furnishings and other objects could be
damaged.
☞
Cover the working surface.
☞
Keep the installation area clear.
Observe the following specifications for the height of the
device:
y
The height “a” from the upper edge of the top trim frame
to the lower edge of the support foot must lie between
760 and 940 mm.
y
The upper edge of the panel must lie 25 mm below the
upper edge of the work top.
☞
Observe the installation dimensions.
D
“2.6 Installation dimensions” (page 7).
a
a
☞
Determine height “a”.
a - 25
Rough setting of the height:
☞
Release the two screws on the support foot.
☞
Adjust the support foot in the vicinity of the elongated
holes.
☞
Adjust the height per the determined dimension “a- 25”.
☞
Tighten the two screws again.
The fine adjustment of the height takes place only once the
device is in the final position.
☞
Determine the assembly position.
☞
Ensure that the installation surfaces (floor or cabinet) are
level and load-bearing.
☞
Place the device in the desired position with two persons.
When doing so, observe the following specifications:
y
With example installation “in a cabinet”: The device
must be slid into the cabinet without tipping it.
y
For recirculating air and hybrid operation: For the filter
change, ensure sufficient space.