Berbel BWH 60, Руководство по эксплуатации

Страница: 21 / 36

Making settings in the configuration mode
Operating 21
Turning the extraction mode/recirculated air mode
setting on and off
As delivered, the extraction mode/recirculated air mode
switching function is turned off.
In order to turn the extraction mode/recirculated air
mode switching function
on , proceed as follows:
Ø
Turn the configuration mode on.
Ø
Briefly touch the touch pad

(power level 2).
Ø
The symbol of the touch pad  (power level 2) is
brightly lit and the symbol for the extraction
mode/recirculated air mode function is dimly lit.
The function is activated.
Ø
Turn the configuration mode off.
In order to turn the extraction mode/recirculated air
mode switching function
off , proceed as follows:
Ø
Turn the configuration mode on.
Ø
Briefly touch the touch pad

(power level 2).
The symbol of the touch pad  (power level 2) is
brightly lit and the symbol for the extraction
mode/recirculated air mode function is turned off.
The function is deactivated.
Ø
Turn the configuration mode off.
Flashing control indicator: resetting the "change the
recirculated air filter/filling"
In recirculated air mode, you must change the filter
filling after at most 350 hours of operation. After this
amount of operating hours, the "change the
recirculated air filter/filling" control indicator will blink.
The operating hours counter for the "change the
recirculated air filter/filling" control indicator is turned on
or off using this setting.
To reset the indicator after the filter filling has been
changed, and to restart the timer, proceed as follows:
Ø
Turn the configuration mode on.
Ø
Briefly touch the touch pad

(power level 3).
The symbol of the touch pad

(power level 3) is
brightly lit and the blinking symbol for the extraction
mode/recirculated air mode function is turned off.
Ø
Turn the configuration mode off.