Preparing for installation
25
hooked into the extractor hood's frame and is
secured with four screws.
The two upper screws are located behind the dirt
strips. The dirt strips must be removed. The dirt
strips are held by magnets. The two lower screws
are visible and directly accessible.
A 2.5 mm Allen key is required for this step.
Proceed as follows to remove the upper grease
tray:
¾
Remove the dirt strips by hand.
¾
Remove the four screws using the Allen key.
¾
Grip the upper grease tray by its lower edge and
pull the grease tray out forwards.
This opening is subsequently used for fine
adjustment and for installing the lower screws.
¾
Close the lower front flap.
