Installing the device
36
Aligning the device
A spirit level and a Phillips screwdriver are required
for this step.
Adjustment
Proceed as follows to align the device's body using
the spirit level:
¾
Adjust the distance from the wall using the
horizontal adjuster screws for the upper
mountings.
¾
Adjust the height using the lower adjuster screws
for the mountings.
¾
To access the lower fastening points, open the
lower front flap and work through this opening.
¾
Screw in the lower fastening points' two screws
until they still project by approx. 5 mm.
