Chapter 4
Settings
Page 24
To find out the current firmware version choose Main Menu > Setup > About.
To upgrade firmware insert memory stick in to USB socket with preloaded firmware named
‘application.tar.gz’. Follow the onscreen prompts until meter has finished upgrading and performed
a reboot.
Note: It is very important not to disconnect power supply from meter during a firmware upgrade as
it can cause the meter to become unusable.
Shutdown
This option will shut down the meter completely. Turn the meter supply off and then on again for a
reboot.
Colour Test
General colour test for LCD screen.
Factory Reset
At any time the meter can be restored to a factory state. This can be very helpful if settings have
been corrupted or the meter needs to be used in another application i.e. changing a DCM to a
SOM.
If the meter will not boot to a status page or the settings become corrupted reboot the meter and
hold the Down button. This will bring up the ‘Utilities’ menu where a Factory reset can be
performed.
Note: Please be aware that all stored settings will be erased when doing a factory reset.
Input Debug
Use this function to see a technical overview of all inputs.
