background image

02

03

This manual contains important instruction for use during installation and 

maintenance of the micro inverter.

To reduce the risk of electrical shock, and to ensure the safe installation and 

operation of the micro inverter, the following safety symbols appear throughout this 

document to indicate dangerous conditions and important safety instruction.

1 Important Safety Information

1.1 Read It First

DANGER

NOTICE indicates a situation that can result in property damage, 

if

 

not

 

avoided

.

Do

 

not

 

use

 

equipment

 

in

 

a

 

manner

 

not

 

specified

 

by

 

the

 

manufacturer

Doing

 

so

 

may

 

cause

 

death

 

or

 

injury

 

to

 

persons

,

 or

 

damage

 

to

 

equipment

.

Be

 

aware

 

that

 

only

 

qualified

 

personnel

 

should

 

install

 

or

 

replace

 

the

 

micro

 

inverters

 

and

 

the

 

cable

 

and

 

accessories

.

Do

 

not

 

attempt

 

to

 

repair

 

the

 

micro

 

inverter

it

 

contains

 

no

 

user

-

serviceable

 

parts

.

 If

 

it

 

fails

contact

 

customer

 

service

 

to

 

start

 

the

 

replacement

 

process

Tampering

 

with

 

or

 

opening

 

the

 

micro

 

inverter

 

will

 

void

 

the

 

warranty

.

If

 

the

 

AC

 

cable

 

on

 

the

 

micro

 

inverter

 

is

 

damaged

 

or

 

broken

do

 

not

 

install

 

the

 

unit

.

Before

 

installing

 

or

 

using

 

the

 

micro

 

inverter

 

read

 

instructions

 

and

 

cautionary

1.2 Safety

 

Instructions

markings in the technical description and on the micro inverter system and the PV 

equipment. 

Connect the micro inverter to the utility grid only after you have completed all 

installation procedures and after receiving prior approval from the electrical utility 

company. 

Be aware that the body of the micro inverter is the heat sink. Under normal operating 

conditions, the temperature is 20°C above ambient, but under extreme conditions the 

micro inverter can reach a temperature of 80°C (176°F). To reduce risk of burns, use 

caution when working with micro inverters. 

Do not disconnect the PV module from the micro inverter without first removing AC 

power. 

Be aware that the micro inverter has field-adjustable voltage and frequency trip 

points that you may need to set, depending upon local requirements. Only an 

authorized installer with the permission and following requirements of the local 

electrical utility should make adjustments.

NOTICE

WARNING

WARNING indicates a hazardous situation which

,

 if not

 

avoided

,

 can result in death or serious injury or moderate

 

injury

.

DANGER indicates a hazardous situation which, if not avoided, 
will result in death or serious injury.

Содержание ECO











Отзывы: