A
B
C
D
E
08
09
4 Packing Checklist
5 Planning of Micro Inverter Installation
5.1 Explanations of Symbols on Inverter
After you receive the micro inverter, please check if there is any damage on the
carton, and then check the inside completeness for any visible external damage on
the micro inverter or any accessories. Contact your dealer if anything is damaged or
missing.
4.1 Assembly Parts
4.2 Product Description
Description
A
DC connectors
B
AC connector
C
LED
D
Grounding hole
E
Wallbracket hole
5.2 Lightning and Surge Suppression
Micro inverters have integral surge protection, greater than most traditional inverters.
However, if the surge has sufficient energy, the protection built into the micro inverter
can be exceeded, and the equipment can be damaged. For this reason,
recommends that you protect your system with lightning and/or surge suppression
devices. In addition to having some level of surge suppression, it is important to have
insurance that protects against lightning and electrical surges.
Symbol
Description
Dangerous electrical voltage
This device is directly connected to public grid, thus all
work to the inverter shall only be carried out by qualified
personnel.
NOTICE, danger!
This device directly connected with electricity generators
and public grid.
Danger of hot surface
The components inside the inverter will release a log of
heat during operation, DO NOT touch aluminum housing
during operating.
An error has occurred
Please go to chapter 10 “Trouble Shooting” to remedy the
error.
This device SHALL NOT be disposed of in residential
waste
Please go to Chapter 9 “Recycling and Disposal” for
proper treatments.
No unauthorized perforations or modifications
Any unauthorized perforations or modifications are strictly
forbidden, if any defect or damage (device/person) is
occurred, shall not take any responsibility for it.
