IX. Installation Instruction
This product is suitable for standard 80*80mm wall box.
1.Connect the line of power and valve into the terminals. Fix the wall plate into
the wall box by a screwdriver.
2.Connect the lines with the LCD board.
3.Connect the LCD board into the wall plate.
NOTICE:
The installation wire should be 1.5-2.5mm .
Touch Screen Thermostat
X. ATT:
Thank you for buying this product!
Please read this manual for complete instructions on installing and
operating your thermostat. If you require further assistance, please
feel free to contact us.
In the box you will find:
Thermostat
User Manual
Screws
Dryer
Our Service:
We offer the warranty of 24 months from the sales day.
During the warranty, if it is belong to the quality issue, we will fix or
replace them for you by free after test them.
If it is not quality problem or beyond the warranty time, we will
charge for the after-sales service.
TDS21-AC
TDS21-AC
√
√
√
Model
2
9.Advanced Setting Mode
Temperature Adjustment
(Attn: Only when your room temperature is different with actual temperature, you do this operation.)
In power-on status, press about 7 seconds, then “XX X” will display
on the bottom of the screen. For Example: “26 5” means temp is 26.5
℃
then
you
can
press
to modify the temperature.
It will confirm automatically after correct temp twinkling 7 seconds.
Fan Coil Controlling Mode Setting(Only for 2 pipe)
(You can select the fan coil In control & Out of control.)
In “F00” mode, when room temperature reaches to the setted temp, the fan coil stops working.
In power-on status, press about 7 seconds, “XX X” will display on the bottom
of the screen, then continue to press
again, “F00” or “F01” will display.
Press to choose “F00” or “F01”
In “F01” mode, when room temperature reaches to the setted temp, the fan coil goes on working.
8. Setting
the
Circulation
of
Timer
Switch
After setting the time of timer switch, continue to press the
,
there will
be “LooP”
,
then press
,
week display area will displays the day of
the week, or the transformation of “12345" “123456"
,
or “1234567"
.
If the screen only displays the day of the week, then the timer switch setting
is valid only for the day.(= “Execute once” in App interface)
If it displays “12345"
,
then the timer switch is valid from Monday ~ Friday,
and Saturday and Sunday will be invalid
.
If it displays “123456"
,
then the timer switch is valid from Monday ~Saturday,
and Sunday will be invalid.
If it displays “1234567"
,
then the timer switch is valid from Monday ~ Sunday.
BEOK
