30
9.1.1 Prior to any maintenance operations
• De-energise the drive and secure against unintentional switch on.
• Wait until the unit has cooled down – danger of skin burns & pressure build up.
NOTE: ABOUT CHANGES!
Changes which do not comply with SS-EN 1494+A1:2008 are not allowed.
WARNING: RISK OF BURNS!
During operation, gear units may become sufficiently hot to cause skin burns. Care must
be taken to avoid accidental contact.
WARNING: RISK OF BURNS!
After extended running the lubricant in gear units and lubrication systems may reach
temperatures sufficient to cause burns. Allow equipment to cool before servicing or
performing adjustments.
9.2 CONTROL OF SAFETY FUNCTIONS
9.2.1 Control of markings
Check the state of the markings and that no danger signs are missing. The markings shall remain as the
initial one.
9.3 ADJUSTMENT
9.3.1 Prevent self loosening object
CAUTION: RISK OF MACHINE FAILURE!
Always use thread-locking liquid to prevent that screws, pins, bolts and similar parts come
off by itself.