18
4.2 OPERATORS LOCATIONS
When the machine is started or in operation the operators shall not be in the danger zones. For more
information see the risk analysis for the system.
WARNING: CRUSHING RISK!
It is not allowed to work under the raised load until it is secured by suitable means. It is
necessary that the operator can watch the lifting device and the load during all movements.
4.2.1 Noise
Noise measurement in accordance with the directions concerning noise from the National Board of
Occupational Safety and Health (2003/10/ EG). During normal operation the sound level of the jack does not
exceed 70 dB (A).
NOTE: CHECK MOTOR NOISE!
Do not forget to check the sound level of the connec- ted motor according to EN 60204-32.
CAUTION: RISK OF HEARING LOSS!
Noise protection must be built if the sound level of the connected motor exceeds 70 dB.
4.2.2 Stability
For lifting instructions see ”Lifting” on page 23.
DANGER: CRUSHING RISK!
The base, on which the jacks are mounted, should be strong enough to carry the max. load
and should be rigid enough to prevent swings or turns on the sup- porting beam of the jack.
NOTE: ABOUT DECOMMISSIONING!
The information above also applies to the dismantling and decommissioning of the jack.