Operating Instructions
Read it before commencement please
Hydraulic Jacks JH G-plus Series
JH 5 G-plus
JH 10 G-plus
JH 15 G-plus
JH 20 G-plus
L x W x H
mm 311x233x280
Weight
kg
22
Capacity
kg
5500
Lifting height
mm 150
Workingpress.
bar
520
L x W x H
mm 330x247x310
Weight
kg
28
Capacity
kg
10000
Lifting height
mm
160
Workingpress.
bar
520
L x W x H
mm 415x300x310
Weight
kg
44
Capacity
kg
15000
Lifting height
mm
180
Workingpress.
bar
520
L x W x H
mm 435x330x340
Weight
kg
58
Capacity
kg
20000
Lifting height
mm
190
Workingpress.
bar
520
= with slide shoe guiding
Recommended Use
These jacks are designed specifically for lifting heavy loads vertically.
•
They should only be used on solid level ground. Do not use on a
slope. The load must have a suitable strong pick-up point which will
accept the full surface of the lifting toe.
•
The centre of gravity must be in the under half of the load
Do not exceed the maximum load recommended in this document
and shown on the identification plate on the jack.
•
Always lower the jack slowly and carefully. Otherwise the guide of
the housing may be damaged due to high friction forces.
•
Every other use than recommended must be avoid. The
manufacturer or supplier is not liable for any damage resulting from
improper use of the jack. Accidences resulting from improper use
are the responsibility of the user.
These products are not designed:
•
For lifting and moving people or mobile devices.
•
For use in extreme environment (i.e. under hazardous, explosive,
flammable or corrosive conditions)
•
Materials and lubricants used may not meet local food and
agricultural industry regulations
The user
should read these operating and service instructions
carefully before attempting to use the jacks. Particular attention
should be paid to the safety instructions on page 8.
