The TC507 is available with weekly switching clock.
This optional feature allows you to commence
programmes at a preset time or day of week (e.g.
commence programme 2 on Monday at 01:00 ó
clock). You can enter as many switching jobs as
segments can be entered (e.g. 20). By over lapping
switching jobs functions for instance automatic
reducing temperature at night time become possible
on continuous kilns (heat up kilns weekdays at 7 AM
heat up to 1200°C and bring back temperature at 5
PM down to 900°C.
By pressing and holding key (7) the TC507 changes to
the mode of entering weekly switching jobs (display
(6) shows „cl“ for clock). Display (3) reads the number
of the job. Use the keys (17) and (16) to enter the jobs:
Press key
time
(16) to enter the time (e.g. 23:30). All
times are entered in 24h format. To supress the job
enter „off“ instead of a time (to do so press keys (10)
and „0“). As on entering programmes the last job must
be set to „end“.
Now press key
rmp
(17) to select the day of week.
Further to the normal weekday selections monday to
friday the TC507 accepts „daily“, „weekday“ and
„weekend“. All settings are entered as abbreviation (0-
mon, 1-tue, 2-wed, 3-thu, 4-fri, 5-sat, 6-sun, 7-dly,
8-w/d, 9-w/e).
After pressing key
dwell
(16) enter the number of the
programme to be commenced when time is reached.
Enter „0“ as programme number to stop a programme.
This feature can be used to stop a programme at a
certain time or day of week.
To enter next switching job enter key (5); key (4)
brings you to the previous job.
After 15 seconds not pressing any keys the TC507
quits the mode of entering switching jobs and returns
to normal operation. All switching jobs are processed
repeatedly until suppressed on setting them to „off“
manually.
24
Appendix D
Weekly Switching
Clock
o
dwell
time
°
C/h
h.min
°
C
°
F/h
°
F
k
prog#
seg#
value
rmp
tmp
o
dwell
time
°
C/h
h.min
°
C
°
F/h
°
F
k
prog#
seg#
value
rmp
tmp
o
dwell
time
°
C/h
h.min
°
C
°
F/h
°
F
k
prog#
seg#
value
rmp
tmp