Bentel Security BTEL-GT, Инструкция по установке и эксплуатации

Страница: 11 / 64

G
11
GSM Telephone dialler
PROGRAMMING BY KEYPAD
To enable clear and quick programming, voice menu support is provided in various languages. When a language
is selected, the programming voice menu in the selected language will be activated. The BTEL-GT can also be
programmed in one language and then used in another. By pressing a combination of keys, you choose the
parameter that you want to modify, after which you enter the desired value for that parameter. Press the
D
key
to exit the current menu and go back (if no keys are pressed, the voice messages for each level of the menu will
be repeated 3 times before returning to the previous level). Press the
C
key to accept the value. If you know the
combination of keys that you want to press, you can speed up the programming by entering the sequence while
the voice message is playing without having to wait for the entire message to be played.
Pressing the
D
key continuously for 3 seconds from any level of the menu allows you to return to standby
mode. This feature is valid only while going through the menu or during programming, even if a voice
message from the menu is being played. To return to the menu, you will need to re-enter the Installer Code.
If you make use of this function during programming, any parameters introduced will be
ignored.
for
Parameters
Management
for
Exit
for
Phone
Book
Management
for
Management
Options
Calls
for
Advanced
Management
for
Back
for
Listen
for
Record
for
Back
for
Output
Management
for
Write Phone
Book
for
Delete
Installer Menu
for
Available
Networks
for
Management
Installer
Code
for
Management
Input Polarity
for
Periodic
Message
for
Language change
for
Date, Time
Management
for
Back
for
Read Phone
Book
for
Back
for
Call Handling on
Input
for
Management
Repetitions of
Voice Message
for
Management Call
Cycle
for
Management
Call All
for
Management Call
Confirm Result
for
Back
for
Back
for
Output Type
Management
for
Output Polarity
Management
for
Output Caller
Recognition
Enable
for
Confirm Output
Activation Enable