Bentel Security B3G-220, Руководство по установке

Страница: 46 / 64

46 Universal Cellular Communicator
Communicator
This page configures the events transmitted by the communicator.
SMS/Voice Calls
Call Options

Call All Numbers
: select this option to call all numbers set for a given event.
You can select:
Voice Calls
,
CID: Over GSM
,
Voice Calls and CID: Over GSM
and
Disabled
. If this option is not
selected, the communicator terminates the cycle of calls as soon one of them terminates successfully.

Call Confirmation
: select this option to have the dialer wait for the remote user to confirm reception of the voice message,
otherwise the dialer will try sending the voice message again; the remote user can confirm by pressing

on his phone
(for tone dialling phones only).

While listing to a voice message, pressing

on the phone keypad blocks both the current call and any queued calls as well.
In some cases the dialer may interpret the response of answerphones, GSM operator courtesy messages and so on, so we
recommend leaving
Call Confirmation
enabled.

Repeat Call
: this option is used to enter the number of attempts to be performed (up to a maximum of 8) if the call is not
successful.

Repetitions
: enter the number of times the voice message is to be repeated (up to 8) when the called number answers.
Periodic SMS and Voice

Periodic SMS/Call Send Interval
: set the interval (
Days
and
Hours
) between two
Periodic Call/SMS
events.
Range: 0 to 365 days and 0 to 23 hours.

Periodic SMS /Call First Send
: select the date and time for sending the first
Periodic Call/SMS
event.
The
24hr
/
12hr
button allows you to select the time display format: 12 hour or 24 hour.
The
Now
button sets the PC's current time.

In order to ensure conformity with EN 50136-2, the
Periodic SMS/Call First Send
time must be set to 1 day, and this
function may not be modified. Factory setting: 1 day.
To set the options for
Periodic SMS/Call First Send
, enter the
SIM Phone Number
and enable
Automatic Clock
Adjust
options in the
Options
page.

Ring only for periodic event
: with this option enabled, the system sends a 5 s ring tone instead of a periodic voice
message.
Phone Number Use
This table specifies which numbers in the
Phonebook
are to be used for sending SMS (
SMS Phone Numbers
) and voice
messages (
Voice Dialer Phone Numbers
): you can choose up to 8 numbers for each option.
Events—Actions
This table specifies, for each event handled by the communicator, the voice or SMS messages to send to the numbers specified in
the table
Phone Number Use
.

Label
: this column lists the events for which a voice or SMS message is to be sent.

Input 1 Event
(or 2, 3, 4, 5, 6) and
Input 1 Restore
(or 2, 3, 4, 5, 6) only occurs if terminal
T1
(or T2, T3, T4, T5, T6) is
configured as an input (see
Inputs/Outputs
).

Telephone Numbers
: select the numbers to which the event is to send a voice message.

The phone numbers are those selected in the line
Voice Dialer Phone Numbers
.