Bentel Security B3G-220, Руководство по установке

Страница: 19 / 64

220 Series 19
GENERAL DESCRIPTION
The communicator can communicate with central stations and send both SMS and voice messages; it can also simulate a PSTN
line in case of malfunction (phone line failure) or substitute of one completely in areas with GSM coverage in which PSTN calls are
not available.
IT can report alarms over the GPRS network, for reliable, fast communications with central stations equipped with a Sur-Gard
System
I
,
II
,
III
,
IV
or 5 receiver. The performance of the communicator depends largely on the GSM coverage, and it should not
be installed without having first checked the position of the antenna for best reception (the LED at least must be on).
The communicator has 6 terminals (T) which can be programmed as follows.

Due to the nature of the GSM network, the communicator may be used solely for its intended purpose and NOT as a modem
for sending faxes or data or for remote assistance services.

Output which can be activated/deactivated remotely
(reserved manual) or used for reporting the following events:

Input for:

problem with PSTN line;

activate voice dialer;

problem with GSM network;

activate SMS dialer;

Fail To Communicate (FTC);

activate digital dialer;
 IP receiver fault;  cancel internal transmissions and delete phone queue;
 power failure;  force communications to GSM.
 tamper;
 panel interconnection fault;
 radio disturbance detected (Jamming);
 antenna fault;
 cellular network fault.