BENSHAW RSi H2 Series, Инструкция по эксплуатации

Страница: 39 / 49

890053-03-01
890053-
03-00
33
Connecting with Other Products
Attribute
ID
Access
Attribute
Name
Range Definition
the reference frequency.
4 N/A Net Reference -
6 Get
Drive Mode
(Note1)
0 Vendor Specific Mode
1 Open Loop Speed (Frequency)
2 Closed Loop Speed Control
4 Process Control (e.g. PI)
7 Get SpeedActual 0
– 24000
Displays the present output
frequency in [rpm].
8 Get/Set SpeedRef 0
– 24000
Displays the reference frequency
in [rpm]. Reflected when DRV-07
(Freq Ref Src) is set to FieldBus.
9 Get Actual Current 0
– 111.0 A
Monitors the present current in 0.1
A increment/decrement.
29 Get
Ref.From
Network
0
Command source is not the
DeviceNet communication.
1
Command source is the DeviceNet
communication.
100 Get Actual Hz
0
–
400.00 Hz
Monitors the present operation
frequency (Hz).
101 Get/Set Reference Hz
0
–
400.00 Hz
Speed reference may be given via
a network communication if DRV-
07 (Freq Ref Src) is set to 8
(FieldBus).
102 Get/Set
Acceleration
Time (Note2)
0
–
6000.0 sec
Sets/monitors the acceleration time
of the inverter.
103 Get/Set
Deceleration
Time (Note3)
0
–
6000.0 sec
Sets/monitors the deceleration
time of the inverter.
(Note1) Related APP-01 (App Mode) settings. When APP-01 (App Mode) is set to Proc PID,
MMC, then the Drive Mode becomes "Process Control (e.g. PI)."
(Note2) Value at DRV-03 (Acc Time)
(Note3) Value at DRV-04 (Dec Time)
Service
Service code Definition Support for class
Support for
instance
0x0E Get Attribute Single No Yes
0x10 Set Attribute Single No Yes