890053-03-01
890053-
03-00
15
Description of Keypad Parameters
③
[COM-09] FBus Led: Information about LED indicators on the
communication board
Displays on the Keypad the status of the LED indicators on the H2
communication board. Refer to section "10.4 LED indications and
troubleshooting."
Example of COM-09 (FBus LED) indication
LINK1
LINK2
ERROR
CPU
LED is OFF LED is ON
LED is ON
LED is ON
④
[COM-22] opt para-13: Set the network communication speed. (100 Mbps,
Auto Negotiation)
The EtherNet speed parameter is fixed at "0" by default for 100 Mbps
communication speed.
⑤
[COM-23] opt para-14: CIP Input Instance - Transmission Data Setting
This parameter is required for EtherNet/IP protocol service. It specifies the
data format of the inverter status to be transmitted to the client (originator)
during an I/O communication via a CIP (Common Industrial Protocol). Refer to
the Assembly Object section of EtherNet/IP.
Select one of the data transmission addresses from COM-31 to COM-38 for
monitoring.
You can
set “opt para-14 to between “0” and “11.” Refer to the following table
for the description of the “opt para-14” settings.
09 FBus LED
