BENSHAW ENHANCED KEYPAD, Руководство пользователя

Страница: 13 / 24

5. Change the displayed value to the desired value. For parameters that
configure a function, use the up or down arrow key to move the cursor to
the desired function and then press ENT. Note that the second line does not
show the function just configured; instead it shows a number
corresponding to its position in the function list (with 0 being the first
function listed).
For parameters that are assigned a value, use the numeric keypad to key in
the parameter’s value. (Alternately, you may scroll to the desired value by
using the up or down arrow keys.)
6. Press ENT to save the new value. (If you do not wish to save the selected
value , press ESC to abort and return to the display showing the parameters
in the parameter group.)
7. After configuring the value of the parameter, the list of parameters will
return to the display. You may now select another parameter to configure,
or press ESC to return to the list of parameter groups. To return to the
Operate Mode, press SHIFT+OPR/F2 (or navigate to it via the Menu
Display mode).
The Menu Display Mode
The Menu Display Mode may be thought of as the hub on which all the other
modes are mounted. Once you navigate to this mode by pressing the MENU key
on the keypad, you may highlight the desired mode (by pressing the up or down
arrow key) and then pressing the ENT key. The selected mode will then become
active, and the display for the mode will be shown on the keypad.
The Active Faults Mode
When a fault occurs, the Active Faults mode automatically activates. The display
for Active Faults shows the phrase “Active Fault” followed by a sequential
number. The second line shows the description of the fault, while line three
shows the fault code number. (See RSi SX Parameter Configuration manual for a
list of fault descriptions and codes, as well as suggestions for recovering from the
fault condition.) A typical display would appear as follows:
To recover from a fault, correct the condition causing the fault and then press
STOP.
11
1 - INTRODUCTION
Active Fault #3
Overcurrent
F8
FLT 10.00Hz KYP