BENSHAW ENHANCED KEYPAD, Руководство пользователя

Страница: 11 / 24

To configure the value of a parameter in this mode, follow these steps:
1. When the Parameter Mode is first entered after power-up, the parameter
groups will be listed in the order shown in the RSi SX Parameter
Configuration manual starting with the first group, Security. On
subsequent entries to this mode, the parameter groups will appear in the
same order but will start with the last parameter group accessed.
2. Use the down arrow key to move the cursor down the list until the
desired parameter group is reached.
3. Press ENT.
4. The parameters in the selected parameter group will now be displayed
starting with the first parameter in the group. Use the down arrow key to
scroll to the desired parameter.
5. Press ENT.
6. The value of the parameter will now be shown on the second line of the
display. Note that this value may be an actual number (such as 120Hz) or
a function (such as 2-wire). If the value is an actual number, the fourth
line will show the range for the parameter. If the value is a function, a
range is not provided. Typical displays for parameter values are shown
below:
9
1 - INTRODUCTION
Maximum Freq
0303 120Hz
Enter # or
0 320
2-wire/3-wire
0401 1
3-wire
2-wire
Name of Parameter
Parameter
Range
Parameter
Address
Current
Value
Sample display for
parameters assigned a value
Sample display for
parameters assigned a function
List of
Available Functions
Parameter
Address
Current
Value
Figure 10: Enhanced Keypad Display of the Two Types of Parameters