BenQ SJ4231, Руководство пользователя

Страница: 23 / 54

E
n
g
li
sh
Using your remote control
Power on and standby
Make sure that the TV power cable has been plugged into a wall
power outlet, and the outlet has been switched on (if there is a
switch).
Power on the TV
When TV is plugged into a outlet, the power indicator will light
up amber, which indicates the TV is in standby mode. Press
Power/standby once on the remote control, and the TV will
turn on with the power indicator light turning into blue.
Put the TV to standby mode
Press Power/standby again on the remote control, and the TV
will enter into the standby mode with the power indicator light
turning into amber.
Switch inputs
1. Press Input under remote control.
2. Press
▲▼
or
◄ ►
on the remote control to select and
display the selected input.
Adjust the audio settings
Adjust the volume
• Press VOL + on the TV, or + on the remote control to raise
the volume. An volume bar will be shown on your screen and
increased in its length as you raise the volume.
•
Press
-
VOL on the TV, or
-
on the remote control to lower
the volume. An volume bar will be shown on your screen and
decreased in its length as you lower the volume.
• DVI can be selected only when a DVI digital video signal source has
already been connected to the HDMI input.
•
When the selected input is Video or PC input, you can toggle
between the current input and previous selected one by pressing the
Recall button on your remote control.
19
Getting to know the remote control Using your remote control 20