BenQ SJ4231, Руководство пользователя

Страница: 11 / 54

E
n
g
li
sh
Tips on using your remote control
• Point and aim the remote control
directly at the TV sensor window (below
the power indicator) when you press a
button.
• Keep your remote control in an area
within 30 degrees and 5 meters to the
sensor.
• Do not cover the sensor, nor place
objects between it and the remote
control to block the signal.
• Poor signal receiption by the antenna will result in poor picture
and/or sound quality on your TV. To get the best quality picture
and sound, an outdoor TV antenna system that is properly aligned
will be required. Please consult with an antenna specialist for the
requirement.
• This TV has a built-in analog TV tuner, which allows the connection
from a traditional analog TV antenna system. To receive digital TV
programs, you will need to connect your TV to an external digital
TV tuner (decoder), or a digital set top box (STB).
Test your remote control
Press the power/standby button (as shown
in Fig left). This shall turn on the TV with the
power indicator lights up in blue. If succeed,
proceed to “7. Watch the TV channels” in Page 9.
If fail, first check the power is available or not(The
power indicator should lights in amber.).Second
try to turn on the TV by pressing the power/
standby button on the TV. If the TV turns on,
the problem should be on the remote control. In
this case, please check the batteries and replace
them with new ones if necessary.
Press the power/standby button on the TV or
remote control once again.This shall turn off and
put the TV back to standby mode with the power
indicator turn into amber.
7 Part I: Quick Start Guide Part I: Quick Start Guide 8