Touring your nScreen
12
Rear view
(1)
(2)
(3)
(4)
(5)
(6)
(7)
No.
Rear components
(1)
Back cover
Inside the cover, you can find the memory slot of
the nScreen. You can replace the existing
memory module of your nScreen from here.
For more information about replacing the memory
module, the limit of maximum memory, or the types of
BenQ certified memory modules for your nScreen,
refer to
"Replacing the memory" on page 36
.
(2)
Cable clip
You can route the cables via the cable clip.
(3)
Power jack
Connects AC power supply to power the nScreen.
(4)
LAN (Local Area Network) port (RJ-45
connector)
Allows the nScreen to connect to a 10/100Mbps
fast Ethernet 100BASE-T network.
Please be careful to avoid plugging an RJ-11 phone
cable connector in the RJ-45 port. This will damage
the LAN port. They look similar, but the RJ-45
connector is wider than the RJ-11 connector, and has
more conductors.