Operation
42
Eng
lish
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speakers. Be sure
you have made a correct connection to the projector audio input. See
"Connections" on page
19
for how the audio input is connected.
Muting the sound
To temporarily turn off the sound,
•
Using the remote control
Press MUTE to temporarily turn off the sound. While the sound is
off, the screen will display
in the upper right corner of the screen.
To restore the sound, press MUTE again.
•
Using the OSD menu
1.
Press MENU/EXIT and then press
/
until the SYSTEM
SETUP: Advanced menu is highlighted.
2.
Press
to highlight Audio Settings and press ENTER.
The Audio Settings page displays.
3.
Highlight Mute and press
/
to select On.
4.
To restore the sound, repeat steps 1-3 and press
/
to select Off.
Adjusting the sound level
To adjust the sound level,
•
Using the remote control
Press
or
to select a desired sound level.
•
Using the OSD menu
1.
Press MENU/EXIT and then press
/
until the SYSTEM SETUP: Advanced menu
is highlighted.
2.
Press
to highlight Audio Settings and press ENTER. The Audio Settings page displays.
3.
Press
to
highlight
Volume and press
/
to select a desired sound level.
Turning off the Power on/off Ring Tone
1.
Repeat steps 1-2 above.
2.
Press
to
highlight
Power on/off ring tone and press
/
to select Off.
The only way to change Power on/off ring tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power on/off ring tone.
INPUT SOUCER
AUDIO IN
AUDIO OUT
PC
mini jack
mini jack
HDMI 1/2
HDMI
mini jack
VIDEO
RCA mini
jack
S-VIDEO
RCA mini
jack
COMPONENT
RCA
mini jack
