Introduction
12
Eng
lish
16.
LIGHT
Turns on or off the remote control backlight
for about 10 seconds. Pressing any other key
while the backlight is on keeps the backlight
on for a further 10 seconds.
17.
POWER OFF
Turns off the projector. See
"Shutting down
the projector" on page 43
for details.
18.
S-VIDEO
Displays the S-VIDEO source selection.
See
"Switching input signal" on page 29
for
details.
19.
PC
Displays the PC source selection. See
"Switching input signal" on page 29
for details.
20.
HDMI 2
Displays the HDMI 2 source selection. See
"Switching input signal" on page 29
for
details.
21.
Right cursor/Increase volume level (
/
)
: Navigates and changes settings in the
OSD. See
"Using the menus" on page
26
for details.
: Increase Volume.
22.
Down cursor/Keystone (
/
)
: Navigates and changes settings in the
OSD. See
"Using the menus" on page
26
for details.
: Manually corrects distorted images
resulting from an angled projection.
See
"Correcting keystone" on page 31
for details.
23.
ASPECT
Select the display aspect ratios. See
"Selecting the aspect ratio" on page 32
for
details.
24.
FREEZE
Freeze/unfreezes the on-screen picture.
See
"Freezing the image" on page 41
for
details.
25.
AUTO
Automatically determines the best picture
timings for the displayed image.
26.
SHARP
Displays the SHARPNESS setting bar. See
"Adjusting Sharpness" on page 36
for details.
27.
CONTRAST
Displays the CONTRAST setting bar. See
"Adjusting Contrast" on page 36
for details.
28.
BLANK
Hides the screen picture. See
"Hiding the
image" on page 40
for details.
29.
TINT
Displays the TINT setting bar. See
"Adjusting Tint" on page 36
for details.
30.
TEST
Displays the test pattern.
