18
19
PRE-INSTALLATION INFO
cHEcK contEntS
Separate all parts from packaging and check each part with the pack contents
section.
make sure all parts are accounted for before discarding any packaging material. If
any parts are missing, do not attempt to install the electronic flush valve until you
obtain the missing parts.
WaRningS
do not install the system facing a mirror or any other electronic system operated by
an infrared sensor.
To prevent reflection problems, it is recommended keep a minimum distance of
1.50 meters between the flush valve and other objects.
pREpaRation FoR inStallation
Flush water supply lines thoroughly before installing the flush valve. do not allow
dirt, Teflon tape or metal particles to enter the flush valve.
iMpoRtant
All plumbing is to be installed in accordance with applicable codes and regulations.
STEP 1 – INSTALLING THE FLUSH VALVE
1
Close the stop valve to remove
the brass pipe.
note:
make sure to flush the
system before removing the
brass pipe.
2
Loosen the nut and remove the
pipe.
3
Insert the filter and the solenoid.
Tighten the nut.
4
Open the stop valve
INSTALLATION
