BENETEAU 323, Руководство пользователя

Страница: 4 / 85

BENETEAU 323 Page 4 of 85
Apr. 01, 2004
rev 00
II) ANTI-FOULING
The primary function of your Beneteau is to maximize your boating pleasure.
Your new Beneteau was made to last for many years. From the very beginning, care has
been taken in building your boat. Your years of pleasurable ownership are dependent
upon proper care and preparation.
Between the gel coat and the fiberglass laminate, Beneteau applied a Vinylester
resin that greatly reduces the phenomenon of osmosis and osmotic blistering. All
materials used in the construction of your Beneteau are of high production quality.
Sampling of materials and operational standards are monitored so that the structural
design matches the engineered standard. This, coupled with the mastery of building
techniques, allows Beneteau USA to offer you one of the most favorable structural
warranties in the marine industry.
Methodology for anti-fouling application when new:
1. Clean and degrease hull thoroughly using a denatured ethyl alcohol
2. Sand hull using sandpaper with a minimum grit of #220. (i.e., 220, 300, or 400)
3. Rinse with fresh water.
DO NOT USE DETERGENTS. DO NOT PRESSURE WASH.
4. APPLY ANTI-FOULING TO MANUFACTURER'S DIRECTIONS.
NOTE: It cannot be emphasized enough that thorough de-waxing must
occur. Furthermore, if the gel coat is abraded with coarse sandpaper,
the water imperviousness will be destroyed, and the warranty might be
voided.