BENETEAU 323
Page 64 of 85
Apr. 01, 2004
rev 00
OPERATION
WARNING! ALWAYS LEAVE BOTH THE SOLENOID VALVE AND THE VALVE ON THE GAS BOTTLE
CLOSED WHEN THE STOVE IS NOT BEING USED.
1. Read and follow the instructions printed on the propane warning labels located at the appliance and
under the lid of the gas storage locker.
2. Be sure all burner and oven knobs are in the off position before attempting to operate the galley stove.
3. Activate the main 12V system and be sure the solenoid switch is in the off position.
4. Open the supply valves and test the system for leaks following the instructions on the locker warning
label.
5. Switch on the solenoid using the breaker on the 12V panel.
6. Light the appliance in accordance with the stove manufactures procedures. Generally each burner is lit
by turning the burner control knob to the lighting position and then pushing the knob in. A safety
thermocouple will keep the valve open as long as the burner remains lit. If the flame goes out it will stop
the gas flow to the burner.
Note: If the odor of gas is detected at any, time turn off all electrical and mechanical systems, extinguish any
open flames and immediately check for a propane leak. Propane is a heavy gas and may settle in the bilge
which represents an explosion and fire hazard.
Содержание 323
