XPR-10 Series Two-Post Lifts
68
P/N 5900951 — Rev. D — May 2019
Raising a Vehicle
This section describes how to raise a Vehicle on your XPR-10 Series Lift.
⚠
WARNING:
Never raise a Vehicle whose weight exceeds the rated capacity of the Lift. Do not
leave the controls until the Lift is engaged on a Safety Lock position or fully lowered.
Only trained personnel should raise and lower the Lift.
To raise a Vehicle
:
1.
Make sure all four Lift Arms are on the ground in their full drive-through positions.
2.
Check under the Vehicle you are going to raise, check for the type of vehicle frame, and then put
the most appropriate Adapters on the Lift Arms.
If you are lifting a sedan or a Vehicle with a unibody construction, a Screw Lift Pad is generally the
best choice. If you are lifting an SUV, truck, or other Vehicle with a frame construction, a Frame
Cradle Pad is generally the best choice.
⚠
WARNING:
Always use the Adapter type best suited for the Vehicle you are raising. If you use
the wrong Adapter type, the Vehicle could become unstable.
3.
Drive the Vehicle in.
⚠
CAUTION
When driving a Vehicle into position, keep to the middle of the area between the
Posts. If you hit a Lift Arm or any other portion of the Lift, you could damage the
Vehicle and/or the Lift.
4.
When you are satisfied with the location of the Vehicle, put it in park, put on the parking brake, and
turn off the motor.
If the Vehicle is a manual transmission, put it into first gear before turning off the motor.
5.
Get out of the Vehicle; open the doors carefully to avoid banging them on the Lift.
6.
Locate the manufacturer’s recommended Lifting Points for the Vehicle you are raising.
If you are unsure where the Lifting Points are, consult
Vehicle Lifting Points for Frame Engaging
Lifts
, which was provided with the Lift, or the manufacturer of the Vehicle. If you no longer have
Vehicle Lifting Points for Frame Engaging Lifts
, contact BendPak Support email
or call
(800) 253-2363
to get a replacement copy.
⚠
WARNING:
Do not ‘eyeball’ the best location for the Adapters.
You must use the
manufacturer’s recommended Lifting Points
. If you do not, the Vehicle
could become unstable and fall, which could damage the Vehicle, damage the Lift,
or injure or even kill anyone under the Vehicle.
7.
Adjust the Lift Arms under the Vehicle so the Adapters are
directly under
the Lifting Points for
the Vehicle you are raising.
If necessary, use the included Auxiliary Adapters for extra height.
8.
Raise the Lift until
just before
the Adapters make contact with the Lifting Points.
9.
Check the Arm Restraint Gears on all four Lift Arms to make sure they are engaged.
If they are not engaged, move the Lift Arms back and forth until they engage.
10.
Raise the Lift until the tires of the Vehicle are a few inches off the ground.
11.
Check to make sure all four Adapters are making solid contact with the Lifting Points.
Содержание XPR-10 Series
