Bendof NB-12MV, Инструкция по эксплуатации, Страница: 6 / 54

6
English
7. SYMBOLS
8. STANDARD ACCESSORIES
Storage case, side handle, Allen key, user and mainte-
nance manual, battery charger, 2 lithium-ion batteries
9. APPLICATION AREAS
Cutting of rebar and reinforcing mesh used for reinfor-
cing concrete.
10. TECHNICAL DATA
NOTE
Hikoki reserves the right to make changes to technical
data without prior notice, dependent on Hikoki’s conti-
nuous research and development work.
11. BATTERY CHARGING
Recharge the battery in accordance with the following
instructions before using your power tool.
1. Connect the battery charger power cord to the
socket.
The indicator light will flash red (at 1-second inter-
vals) after connecting the power cord to the battery
charger.
2. Insert the battery into the battery charger.
Insert the battery firmly into the battery charger as
shown in figure 3.
3. Charging.
The charge indicator light will flash blue when a
battery is inserted into the charger. The charge in-
dicator light will turn green when the battery is fully
charged. (See Table 3.)
• Charge indicator light indications.
The charge indicator light indications are shown
in Table 3, according to the status of the battery
charger or rechargeable battery.
• Information on temperatures and charging time
for the battery.
The temperature and charging times will be as
shown in Table 4.
NOTE
Charging time may vary depending on the ambient
temperature and mains voltage.
CAUTION
The battery charger will become hot and may be the
cause of a fault if it is used continuously for exten-
ded periods of time. After a charge is complete, al-
low the battery charger to rest for 15 minutes before
the next charge.
4. Unplug the battery charger from the socket.
5. Grasp the charger firmly and pull the battery out
of the charger.
NOTE
Remember to remove the battery from the battery
Model NB12MV
Voltage 36V
Cutting capacity 6-12 mm
Cutting speed 2 sec
Maximal rebar hardness 490 N/mm²
Rotation angle No rotation
Dimensions (LxBxH) 380 x 105 x 250 mm
Weight 6,2 kg (BSL36A18)
Table 2.
To reduce the risk of injury, user must
read instruction manual.
Always wear eye procetion.
Wear head protection.
No open flame; Fire, open ignition source
and smoking prohibited.
Keep your hands away.
Keep your face away.
Only for EU countries
Do not dispose of electrical tools together
with household waste material!
In observance of European Directive
2012/19/EU on waste electrical and
electronic equipment and its implemen-
tation in accordance with national law,
electric tools that have reached the end of
their life must be collected separately and
returned to an environmentally compatible
recycling facility.
Disconnect the battery.
Warning.
Table 1.