2
English
tool in a damp location, use a socket with a
residual current device (RCD).
Using an RCD reduces the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating power tools.
Do not use power tools when you are tired
or under the influence of drugs, alcohol or
medication.
A moment of inattention while working can result
in serious personal injury.
b) Wear personal protective equipment. Always
wear eye protection.
Protective equipment such as a face mask, non-
skid safety shoes, helmet or hearing protection
for situations where they are warranted will redu-
ce personal injury.
c) Prevent unintended starting. Make sure the
switch is in the OFF position before connec-
ting the power tool to the power source and/
or battery pack, picking it up or carrying it.
Carrying the power tool with your finger on the
switch or connecting it to the power source/bat-
tery pack when the switch is in the ON position
can result in accidents.
d) Remove any adjustment tools before starting
the power tool.
Leaving a spanner or key on or in a rotating part
on the power tool can result in personal injury.
e) Do not reach too far. Always stand with a firm
and balanced footing.
Doing so provides better control of the power
tool in unexpected situations.
f) Wear proper clothing. Do not wear loose or
baggy clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts.
Loose clothing, jewellery or long hair can get
caught in moving parts.
g) If accessories for connecting dust extraction
devices are included, make sure that these
devices are connected and used correctly.
4. Operation and maintenance of power tools
a) Do not force the power tool. Use the proper
tools for the job you intend to do.
Using the proper tools makes for better and sa-
fer work at the intended speed.
b) Do not use the power tool if the power
switch cannot be turned ON or OFF.
Power tools that cannot be controlled with the
power switch are dangerous and must be repai-
red.
c) Disconnect the cord from the socket - and/or
the battery pack from the power tool - before
making any adjustments, changing access-
ories, or storing the power tool.
Such safety precautions reduce the risk of the
power tool starting unintentionally.
d) When not in use, store power tools out
of reach of children and do not let anyo-
1. GENERAL SAFETY INFORMATION
FOR POWER TOOLS
WARNING
Read all safety information and instructions.
Failure to follow the safety information and instructions
below may result in electric shock, fire and/or serious
injury.
Retain all safety information and instructions for
future reference.
Carefully follow the instructions in this manual and store
it in a convenient and accessible location. Retain this
manual for future reference until the machine is discar-
ded. If the machine is sold, the new owner must receive
this manual along with the machine.
Carefully follow the instructions below, keeping in mind
the intended use and the environments in which these
tools can be used.
1. Work area safety
a) Keep the work area clean and well lit.
Cluttered and/or dark work areas can cause ac-
cidents.
b) Do not use power tools in explosive atmosp-
heres, such as in the presence of flammable
liquids, gases or dust.
Power tools produce sparks that can ignite the
dust or fumes.
c) Keep children and uninvolved persons at a
safe distance while operating power tools.
Distractions can cause you to lose control of the
tool.
2. Electrical safety
a) The power tool plug must match the socket.
Never modify the plug. Do not use adaptor
plugs for earthed power tools.
Non-modified plugs and matching wall sockets
reduce the risk of electric shock.
b) Avoid physical contact with earthed surfa-
ces such as pipes, heating elements, ranges
and refrigerators.
There is an increased risk of electric shock if
your body is earthed.
c) Do not expose power tools to rain or moistu-
re.
The risk of electric shock increases if water gets
inside the power tool.
d) Do not use the cord inappropriately. Never
use the cord to carry or pull the tool or un-
plug the cord from the wall socket. Keep the
cord away from heat, oil, sharp edges and
moving parts.
Damaged or tangled cords increase the risk of
electric shock.
e) Use an extension cord that is suitable for
outdoor use when working with the power
tool outdoors.
Using an extension cord suitable for outdoor use
reduces the risk of electric shock.
f) If it is not possible to avoid using a power