BENDIXKing KI 300, Руководство по установке

Страница: 31 / 50

____________________________________________________________________________
89000004-101 KI 300 Installation Manual
Rev 1 Page 4-4
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 4-4 Sub-D Back-Shell
All electrical connections are made on the single rear mounted 9 pin Sub-D. Connections indicated as
Reserved - Do Not Connect (DNC) should not be connected in the installation. Power and ground are
applied to pins 5 and 9 respectively.
Table 4-1: KI 300 Electrical Pin Out
PIN # FUNCTION TYPE NOTES
1 Serial 1 RX Input Serial Bus – KA 310
2 Serial 1 TX Output Serial Bus – KA 310
3 Serial 0 RX Input Reserved – DNC
4 Serial 0 TX Output Reserved – DNC
5 Power + Power Main Power Input
6 Select Input Reserved – DNC
7 V Battery Output Reserved – DNC
8 Serial Ground Signal Serial Bus - Ground
9 Power Return- Ground Main Power Ground
Figure 4-5 Wiring Diagram