Bender B95061094, Руководство по установке

Страница: 17 / 44

Installation, connection and commissioning CP9xx-Kit
17 CP9xx-Kit_D00399_00_M_XXEN/07.2019
4.4 Connections
4.4.1 Factory settings communication addresses
CP9… devices are delivered with the following factory settings:
Some of the settings can be changed during commissioning via the display or the web user interface.
If you are familiar with the configuration of computer networks, you can carry
out the connection of the CP9… alarm indicator and operator panel yourself.
Otherwise please contact your EDP administrator!
For UL-applications:
Minimum temperature rating of the cable to be connected to the field wiring ter-
minals: 75 °C
No. Connection No. Connection
1
Plug connector digital inputs
8
Termination of Modbus RTU and BMS bus
2
I²C interface
9
USB ports (for touch sensor)
3
Plug connector to energy storage board
10
DVI output
5
Voltage supply A1/+ A2/–, PE
11
Audio output
6
Ethernet (RJ45/CAT5); HTTP, Modbus TCP, BCOM
12
Audio input
7
X1 plug connector for Modbus RTU, BMS bus
13
Connection to control relay
Parameter Factory setting
IP address
Connection always be made via the pre-defined IP address
(e.g. for commissioning or for direct 1:1 ETH connection)
169.254.0.1
Net mask 255.255.0.0
Standard gateway 192.168.0.1
DNS -
DHCP off
t
off
Timeout for DCHP address assignment
30 s
BMS address 1
BMS protocol BMS i
BCOM system name SYSTEM
Subsystem address 1
BCOM device address 1
1
2
4 5 6
7
3
9
13
10 11 12
8