Bend-Tech Dragon A250 Series Скачать руководство пользователя страница 8

Страница: 8 / 44

viii

Bend-Tech Dragon A250

Assembly Manual

Glossary

Axis

A fixed reference line used by the Dragon A250.

Bend-Tech 7x

Machine design software - CAD.

BOB

Breakout Board.

Material Support Lift

The Material Support Lift supports

material to reduce sag.

Chuck

Located on the Trolley, the Chuck

holds the material so it can be moved

forward, backward and rotated.

Control Box

Connects Dragon Software Suite

to the Dragon A250.

Coolant Tray

Cools cut parts as they are produced.

E-Stop

Emergency stop.

ESS

Ethernet Smooth Stepper (Control Board).

Ethernet

System for connecting multiple

computers via a Local Area Network.

Gate

The Gate supports the material at the

front of the machine. It consists of two

sets of self-centering roller jaws.

Interface

Any particular screen display generated

by Bend-Tech software.

Mach3

Machine driver software.

Parts Catcher

The parts catcher is placed at the front of

the machine to catch parts as they are cut.

Rack & Pinion

The rack and pinion gear assembly is

the method that drives the horizontal

movement of the Trolley.

Rail & Beam

The Beam is the main structure of the

Dragon A250, the rails are attached to

the beam and guides the Trolley.

Tail

The Tail is located at the opposite end of the

Head of the machine. The Tail arrives pre-

assembled. The X-Axis homing sensor, rear

E-Stop are located at the Tail of the machine.

Toolhead

Operates the Marker, Laser Light, and Torch.

Trolley

The Trolley rides on the Rail, and carries

the Chuck forward and backward along

the length of the Support Beam.

Содержание Dragon A250 Series













































Результаты поиска

Содержание Dragon A250 Series

Отзывы:

Похожие инструкции для Dragon A250 Series

Бренды по названию

Популярные бренды

Bend-Tech Dragon A250 Series, Инструкция по сборке

Результаты поиска

Содержание Dragon A250 Series

Отзывы:

Похожие инструкции для Dragon A250 Series

Бренды по названию

Популярные бренды