Bend-Tech Dragon A250 Series Скачать руководство пользователя страница 4

Страница: 4 / 44

Bend-Tech Dragon A250

Assembly Manual

Covering Bend-Tech Dragon

Bend-Tech, LLC provides a limited warranty on all new Dragon machines that are

manufactured directly or under license by Bend-Tech, LLC, and sold by Bend-Tech, LLC or its

approved distributors.

Warranty Coverage

Each Bend-Tech Dragon machine is warrantied by the manufacturer against defects in material

workmanship for 12-months. The warranty period commences upon delivery of the Dragon

machine to the customer’s facility.

Repair or Replacement Only

The Manufacturer’s sole liability, and the Customer’s exclusive remedy under this warranty

shall be limited to repairing or replacing the defective part. Repair or replacement of parts

is at the sole discretion of the manufacturer. The Customer is responsible for warranty parts

installation. Bend-Tech does not provide warranty service labor.

Limits

This warranty does not cover components subject to wear due to normal use of the machine

such as belts, lights, tooling etc. This warranty is void if Bend-Tech, LLC has determined any

failure is the result of mishandling, abuse, misuse, improper installation, improper storage,

improper maintenance or unauthorized modification of the machine. The warranty does not

cover damage due to natural disasters, fire, flood or other external factors. The warranty may

become void or limited in the event that hardware changes or adaptations are made to the

machine.

Software

Dragon software is covered by a 2-year maintenance plan from the purchase date of the

Dragon machine. After the 2-year maintenance plan is expired, the Customer can purchase

a maintenance plan. A maintenance plan will ensure the customer always has the newest

version of Dragon software. The maintenance plan is critical to keeping Dragon software

updated with the newest capabilities possible, and is critical to the servicing of the machine.

Bend-Tech, LLC will contact the Customer regarding updates to the maintenance plan within

1-month of expiration. Contact Bend-Tech Support to ensure software is up to date: support@

bend-tech.com.

Limited Warranty

Содержание Dragon A250 Series













































Результаты поиска

Содержание Dragon A250 Series

Отзывы:

Похожие инструкции для Dragon A250 Series

Бренды по названию

Популярные бренды

Bend-Tech Dragon A250 Series, Инструкция по сборке

Результаты поиска

Содержание Dragon A250 Series

Отзывы:

Похожие инструкции для Dragon A250 Series

Бренды по названию

Популярные бренды